As in skate. 3: when the local skater bails, the bones it hurt show over
the world through the body, yellow where a hit bruised one and red where
one broke it, with the bail's Meat card in the bottom left corner in the
place of skate.'s own HUD there: its time, hits (head hits double,
vehicles half again), broken bones, road rash, airtime, fall, top speed
and rotations, each scoring, and the map's best. A bone breaking pulses
the screen's edges red and, in single player, slows the game down a
moment. Off until switched on, as in skate.: in skate.'s menu (Custom
Stuff > Player) or with `hallofmeat 0|1`, saved with the profile.
Everything it draws is skate.'s own, read from the installed game: its
skeleton mesh (the Dem Bones costume) posed with the renderer's own
skinning matrices, its scoring icons, the THRASHER wordmark and its UI
brush strokes. Nothing is shipped.
How it works: No Bail already hooks the skeleton response, which runs
once a physics step right after the body contacts; it now hands that step
on, with the local skater it follows, but only while Hall of Meat is on.
Each step reads what every ragdoll body hit and how hard, and whether the
skater is a ragdoll; the bail runs on the game's own clock so slow motion
measures what the body did. The feature's own hooks, on the renderer's
skinned draw packets and main view and on the UI model's write, are
prepared at startup and switched on only with the feature, and off again
once the HUD corner and the game's speed are given back: switched off, the
game never calls them and the physics step pays nothing. The skeleton mesh
is read the first time it is on; only the images are read at startup,
since the overlay builds its atlas once. The renderer's picture of the
skater is read only while a bail shows. The menu's switch reads the
overlay model like the others. Every address is in the build table with a
fingerprint checked before use. Extension/HallOfMeat/README.md describes
the parts; its tests build with DINGOSDK_BUILD_HALL_OF_MEAT_TESTS.
The slow motion changes SimulationTime's rate, frame cap and time scale as
a session override and steps the local skater along, since skate. sets a
skater's step only when it builds its core. It runs the same at every
break, but never faster than the game ran: with the trainer's game speed
below 1 it only takes the part that is slower still. Afterwards it writes
back what it found, each setting only while it still holds what the slow
motion wrote, so the trainer's speed comes back as it was; a setting
changed from elsewhere meanwhile is left as it is and ends that slow
motion. named_setting_value reads a setting's value for it.
Tuned in play: a bruise from 7 m/s and a break from 12 m/s along the
contact normal (raised twice: a hard fall on flat ground broke bones), a
break worth ten of the lightest hits (a heavy bail's hits and breaks
outweighed the rest of the card) and a fall half of skate. 3's rate.
Fix: the overlay now draws in the back buffer's pixels, not the window's,
so it lines up on displays Windows scales (1920x1080 borderless on 4K).
The skater's render hooks, its skeleton and its body maps were first
found by gBGYo's ReSkate fork (github.com/gBGYo/ReSkate).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Read Dev / Creator / Homie Steam IDs from api.reskate.dev instead of the hardcoded list
- Creator (red) and Homie (gold) tags and hoodie/board colours; Admin tag is now pink
- Global bans: lobby hosts and dedicated servers turn banned players away
("global_bans": false in ReSkateServer.json opts a server out)
- SPECIAL menu page for listed players to hide their own tag and items
- Fix hoodie and board keeping the animated colour after the animation turns off
- Multiplayer protocol 39 -> 40
Skater slot, menu and throwdown fixes; MY MODS rework; lobby parties
Saved skaters (Extension/Customization, Extension/Skater)
- The selected slot, and slots before it, came up as the standard
skater after a start or map change. The game asks for a slot's saved
outfit once per level, and that happened before the cosmetics catalog
could be read. The first selection now waits for the catalog (60 s at
most), and later map changes check against the catalog already read.
- The retry from abdda77 is removed: the record it wrote to is a
temporary on the game's stack, so it could never work.
Pause menu (Extension/UI/NativeMenu)
- ReSkate's entries stopped working after enough map changes: each
level change took new slots in a fixed table of 1024 for the same
buttons. A button now keeps its slot, and a full table hands out the
slot that has gone longest unused.
Throwdowns (Extension/Throwdowns, Runtime/runtime_init.cpp)
- Multiplayer crashed when someone placed a throwdown after a map
change. The event types are freed with the level but were cached for
the process. They are now cleared when a level is left, checked
before use, and looked for again in each level.
MY MODS (Launcher/gui_mods.cpp, gui.cpp)
- Search, a filter and an order; a switch per mod; a menu per row.
- Multi-select with tick boxes, Shift-click and Ctrl+A, and a bar to
enable, disable, move, update or uninstall everything ticked.
Lobby parties (Extension/Multiplayer/Session)
- A lobby is no longer one party. Its host keeps parties the way a
dedicated server does: invite, accept, join, leave, kick, promote,
open and close, with "/p" party chat. The "Lobby party" switch is
gone. Protocol version unchanged (38).
Mod merge (Engine/Vfs), follow-ups to e715b9b
- Files rewritten into the merged patch are tracked by position, so
another mod's added assets no longer shift the lookup.
- Two mods adding different assets under one name is now noted, with
whose copy the maps get.
- mod_merge_unshift_tests compiles with the launcher tests on.
All new code is in Extension/Trainer. The game thread owns the trainer's state; the menu
page only queues `trainer ...` console commands and reads two snapshots.
- physics_tuning_model keeps the field and curve names the game's EBX carries, so the
editable table is built at run time from the player's own data.
- physics_tuning exports game_tuning / read_live / write_live / refresh_skater, with the
same field whitelist and curve rules as the session sync.
- no_bail publishes the physics state the local skater's selector last chose (air time,
wipeouts).
- A guest under host tuning cannot edit; teleports follow the host's noclip permission.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Mesh streaming pool (fixes loading crashes on older GPUs)
- 1.0.0 forced MeshStreaming.PoolSize to 3.5 GiB on every card. An RX 580
crashed while loading with DXGI_ERROR_DEVICE_RESET, and the oversized pool
is the likely cause. The pool is now a quarter of the largest hardware
adapter's dedicated video memory, capped at 3.5 GiB; cards of 6 GB or less
keep the game's own 520 MB. The card, its memory and the chosen size are
logged once at startup.
Remote players (busy servers)
- Transform interpolate is inline plain arithmetic: 22 -> 5.8 ns per joint.
It was 4% of a busy server's client frame, since every player within
200 m has the whole skeleton interpolated every frame.
- Players out of the camera's view and more than 8 m away are sampled at
20 Hz, like far players. Their position still updates every frame for
collision, sound and nametags, and a player coming into view is sampled
that frame.
Expression hooks (run for every expression the game executes)
- No profiler zones in the expression hooks: taking a sample switched them
on, inflating the very samples that measured the hooks.
- The throwdown lab pump does one sorted lookup of the running graph and
skips everything else for graphs it doesn't watch (graph_throttle gets
throttled_graph for this).
Settings and memory reads
- Script gameplay-setting and native-setting gets are served from small
per-thread caches, keyed on the asset/key address, its first 8 name
bytes and a new profile::Store::changes() counter, instead of a store
lookup each call.
- Per-frame reads in the client tick, native settings and population
controls use memory::peek instead of ReadProcessMemory.
- Script error logging probes each argument pointer once.
Launcher
- "Close the launcher when Skate starts" now hides the launcher and exits
when Skate.exe does, instead of exiting as the splash opens. Outside a
Steam library, Skate's protection closed the game (TerminateProcess 0x32)
when the launcher exited during startup; players confirmed turning the
setting off avoided it.
- STATUS tile warns when Steam isn't open or signed in that PLAY starts
offline as Unknown Player (hidden when Offline mode is chosen or while
launching).
- Setting description updated to match.
Startup interventions (20260929)
- exit_return 0x87755f2 -> 0x87fe7fb: the last LEA RSP,[RSP]; JMP stub
before the PUSHFQ / LOCK CMPXCHG routine, as 0x87367cf was in 20260908,
and the return address player logs show. Only enforced once a frame site
is armed; this build's protector has no equivalent rep stosb frame clear.
Client frame cost (profiled 2026-10-02)
- Transform interpolate is inline plain arithmetic (~1% of an MP frame).
- Script gameplay-setting and native-setting gets are served from small
per-thread caches keyed on asset/key address, name prefix and a new
profile::Store::changes() counter, instead of a store lookup each call.
- Hot-path reads in client tick, native settings and population controls
use memory::peek instead of ReadProcessMemory.
- Script error logging probes each argument pointer once.
