vr.anti_aliasing now takes fxaa, smaa or off. SMAA runs the reference
implementation (third_party/smaa, MIT) at its High preset: luma edge
detection and blending weights into per-eye images, then neighborhood
blending into the runtime's swapchain through FXAA's final pass. Its area and
search lookup textures are uploaded once per device. If SMAA cannot be set
up, the eyes fall back to FXAA.
Also export vr.anti_aliasing from config.yaml: the VR backend reads the
process environment, so the setting only worked as an environment variable.
On a Quest 2 through SteamVR at 120 Hz (2136x2236 per eye), SMAA ran at 118.6
fps against 118.8 for FXAA, with p99 frame times of 10.1 and 9.5 ms.
Emulated images keep a running total of their decoded and ETC2/EAC sizes over every mip and layer. --profile writes both as counters, and summarize_profile_trace.py prints their peaks.
The overlay's fallback fonts were the first few fontconfig sans matches,
which rarely include an emoji font. Fall back to Roblox's bundled
TwemojiMozilla and RobloxEmoji fonts, then the system emoji font, before
the sans list.
Roblox's VR debug device renders both eyes into single-sample textures, so
edges were jagged in the headset. When the eyes go to the runtime's
swapchain, an FXAA draw now replaces the plain copy. It samples the eye
directly, and re-encodes for sRGB swapchains so the guest's bytes round-trip
exactly. Anything it cannot set up falls back to the copy.
vr.anti_aliasing (fxaa, the default, or off) controls it. The SPIR-V is
generated from shaders/vr by scripts/generate_vr_shaders.py and checked in,
so builds need no shader compiler; a test checks it against the sources when
glslc is installed.
On a Quest 2 through SteamVR at 90 Hz (2244x2352 per eye) frame times did not
change. Captured output keeps 97 to 98 percent of pixels byte-identical and
the average brightness unchanged, and smooths the edges.
vr.mode in config.yaml picks how Nightcap starts: off on the desktop, on in
VR, auto in VR only when this user's SteamVR is running and its OpenXR
runtime reports a headset. auto never starts SteamVR, and asks its runtime
from a short-lived copy of the process so the runtime's libraries do not load
before the VR backend arms. vr.enabled still works as on/off, and --vr or
--no-vr still override the file for one launch.
With the eye copies no longer waited for, MOCKTAIL_VR_MIRROR_SHM made the CPU
wait for the whole frame before publishing, which cut the frame rate from 117
to 82 fps at 120 Hz. Publish each readback at the next copy, when the GPU has
finished it. The external viewer sees each frame one frame later.
Move the empty wait-and-signal batch into internal::ChainPresentDependencies,
like WaitForPresentDependencies, and test that it waits on every present
semaphore, signals the replacement, never blocks the CPU, and leaves a failed
submit to the guest.
Every frame the CPU waited for the GPU to finish Roblox's whole frame in the
desktop mirror, then again for the eye copy, so CPU and GPU work never
overlapped. The mirror blit now consumes the guest's present semaphores and
signals a per-image semaphore that the present waits on. Present preparation
hands remaining waits to the GPU the same way. Eye copies are submitted from a
small ring of command buffers and fences and rely on queue order, so the CPU
only waits when the GPU is three frames behind or the guest destroys an image
a copy still reads.
On Monado at 120 Hz with 1280x1440 eyes this removed 2 to 5 ms of waiting per
frame and kept the frame rate at 118 to 119 fps instead of 103 to 118.
Also free the copy resources when the guest device goes away without a
session, so a later device never reuses stale handles.
MOCKTAIL_VR_PERF now reports how long the CPU waits in the desktop mirror and
in present preparation, and the time between presents, so per-frame stalls
outside the XR frame cycle show up in the numbers.
The Android client drops HapticService:SetMotor on the Gamepad1 LeftHand and
RightHand motors: its haptics backend only consumes Large and Small. VR games
such as VR Hands drive those motors, so they never vibrated.
- Interpose HapticService::SetMotor through its reflection descriptor, call
the original, and forward Gamepad1 LeftHand/RightHand to OpenXR. The
descriptor and the engine's intensity reader are found by pattern at load,
for both the 2998 (tuple span) and 3222 (shared tuple) reader ABIs. The held
level renews a 50 ms lease every presented frame.
- Report the hand motors at x = -1/+1 in GetMotors. Positional HapticEffects
aim at a hand there with a 0.5 radius (VOXEL DESTRUCT 2 does), so at +-0.2
every effect mixed to zero.
- Play SetMotorState buffers sample by sample with trailing silence trimmed.
Roblox sends 100 x 25 ms look-ahead buffers; taking the peak for the whole
buffer turned a short bump into 2.5 s at full strength.
- Stop vibrating from the DebugDeviceVR haptic slot. The engine pulls it every
frame but with each mix buffer's first sample, held about a second, so it
duplicated the buffers as a long buzz.
- Enable SupportGenericHapticsOnVR and FixRegisterMotors with the other haptic
flags.
The Vulkan adapter exports vk* symbols globally, so a runtime loaded again after it bound its Vulkan calls to the adapter and deadlocked the join. Pinning avoided the reload but left SteamVR with its old VkInstance, which aborted the join with "vkGetInstanceProcAddr: Invalid instance". Later instances now load the runtime libraries with RTLD_DEEPBIND and let them unload with their instance.
- Register HapticProtocol and report motors only when MOCKTAIL_VR_ENABLED is on.
- Drop the per-message [haptic] dispatch log; log each OpenXR haptic result once per hand.
- Write a fast flag only when its name pointer matches the expected name.
- Remove the state-sync fallback that dlsym can never resolve.
- Implement RobloxHapticProtocolBridge for MessageBus HapticProtocol
(SupportsHaptics, GetMotors, SetMotorState, UpdateSingletonVibration).
- Wire bridge into RobloxExperienceComposition and direct game runtime.
- Call JNI NativeGLInterface.nativeUpdateMobileHapticsState during startup
and game completion.
- Enable FFlagKeepHapticsOnMobileWhenGamepadConnected and FFlagVRHaptics in
VR client settings overrides to bypass gamepad haptic suppression in libroblox.
- Directly activate KeepHaptics and VRHaptics fast flag bytes in memory
within RobloxVrDeviceBridge::Activate for builds 2998 and 3222.
- Check xrApplyHapticFeedback result code and add diagnostic logging.
- Remove the MOCKTAIL_VR_TEST_SESSION_LOSS_AFTER fault injection; nothing
used it.
- The scripted head pose and the eye evidence dumper only work in builds
configured with -DMOCKTAIL_VR_DIAGNOSTICS=ON (default OFF); release
builds ignore their environment variables.
- Remove FindFmodInputCaptureProfile and HasExpectedFmodInputCaptureVtable
(only their own tests called them) and the never-defined
PrepareCaptureLocked declaration; the audio bridge files match upstream
again.
- docs/VR.md lists every MOCKTAIL_VR_* variable with its default, linked
from the README.
- Once the guest eye format is known, the eye swapchains are recreated
once in the format that keeps its bytes: the eye format, else its
UNORM/SRGB sibling (raw copy), else the other channel order with the same
sRGB-ness (a blit that only swizzles). Mixed order-and-gamma cases no
longer go through a gamma-converting blit; if only that remains, it is
logged.
- The desktop mirror segment is created with O_EXCL after removing our own
stale segment (a crashed run's leftover), and must be private to this
user before eye images are written to it.
- A new frame_mutex_ is held for the whole XR frame cycle and by every path
that can destroy the session (taken before mutex_). That lets the cycle
release mutex_ while it blocks in xrWaitFrame, so guest render-thread
hooks no longer wait out the runtime's pacing. Swapchain-image and fence
waits stay under mutex_; they return promptly unless the GPU or
compositor stalls, and they run while guest eye bindings are copied.
- Every frame error, including the swapchain-image and copy-fence
timeouts, now tears the session down recoverably instead of ending XR
output for the rest of the run.
- Session recovery backs off (1, 2, 4, 8 s) and recreates the XrInstance
after an instance-loss event, an instance/runtime failure, or three
failed attempts, so VR returns after SteamVR or WiVRn restarts instead
of retrying forever.
- While no XR session runs (headset idle, session not READY, recovering)
presents are paced at 60 Hz outside the backend lock instead of running
unthrottled.
- A PrepareHostPresent failure that consumed nothing (copy resources
unavailable, failed fence reset or submit) presents normally instead of
failing the guest's vkQueuePresentKHR; only device loss is propagated.
- A runtime/guest GPU mismatch falls back to the plain host device and
keeps the game running without headset output, naming both GPUs.
- A failed EGL attach on the GLES path no longer makes window init fail;
the game runs without headset output and the bind is not retried.
An explicit --vr on a Roblox build without VR support now exits with the
build's version and Build ID, the builds VR supports, and how to select one
(--roblox-lib). When VR is only enabled in the config, the launch continues
without VR and logs the same details. The bridge's own Install error names
both as well. The verified build contracts carry their version labels and
move to namespace scope so they can be listed.
VR now stays off at runtime in every build until --vr or vr.enabled: true,
so a normal launch on a VR-capable build never tries to reach an OpenXR
runtime and no longer exits when none is running.
MOCKTAIL_ENABLE_VR defaults to AUTO: OpenXR support is built when the
third_party/OpenXR-SDK submodule is present and skipped with a notice
otherwise, so source packages that do not fetch submodules (Nix, AUR) keep
building. ON still requires the submodule. mocktail-vr-probe is only built
and installed in VR builds.
CI gains an x86_64 job that builds and tests with MOCKTAIL_ENABLE_VR=OFF.
The config docs and README describe the new defaults.
When Roblox asks for a keyboard (showKeyboard), a world-locked panel
opens below eye level as an OpenXR quad layer. Controllers point at keys
and the trigger types; text and key presses go through the same platform
events as the desktop keyboard, so the focused TextBox edits identically.
The layout is US QWERTY without the function row or Ctrl/Alt, with one-shot
Shift, Caps Lock, Tab, Backspace auto-repeat, Enter and Close. A trigger
aimed at the panel is withheld from Roblox so a key press is not also a
click. A text field above the keys mirrors the focused TextBox, whose
desktop overlay never reaches the eye images. MOCKTAIL_VR_KEYBOARD=0 turns
it off.
vr.frame_rate_limit / MOCKTAIL_VR_FRAME_RATE_LIMIT replaces
graphics.frame_rate_limit while VR is active and takes the same values.
It defaults to unlimited so xrWaitFrame paces Roblox at the headset
refresh rate instead of Roblox's own 60 FPS cap.
MOCKTAIL_VR_RENDER_SCALE scales the runtime's recommended eye extent.
SteamVR's recommendation for a Quest 2 at 90 Hz (2244x2352 per eye) missed
the 11.1 ms budget and halved the rate to 45 FPS.
MOCKTAIL_VR_UNPACED=1 stops guest frames from blocking in xrWaitFrame:
the open XR frame spans several guest frames and is submitted once per
display period, for measuring maximum render rate.
SteamVR (vrclient.so) binds its Vulkan renderer to the lifetime of the
XrInstance. When Roblox destroys the LuaApp Vulkan device and creates a
second VkInstance/VkDevice for UGC experiences, reusing the original
XrInstance causes SteamVR to dereference freed device handles in xrEndFrame.
Tear down and recreate the XrInstance whenever a new guest Vulkan instance
is initialized, resetting session state, spaces, and controller actions.
Roblox maps some rbxasset:// names to downloads and opens no local file for
them. For each file under content/ in the overlay folder, change its name in
the loaded libroblox so Roblox opens the local file.
Idea from @dim-ghub in #20.
Roblox 2.742 moves the process-load constructor behind the JNI singleton
initializer and renames registers in the registry initializer. The deriver
finds each leading constructor by its code, and the loader checks that host
bridges run the checkpoint and JNI singleton constructors and skip the two
wiring entries.
strerror_r: Bionic's message table covers errno 0..133 except the
unassigned 41 and 58. Numbers outside that set now get "Unknown error N"
without consulting the host, so the text is the same on glibc and musl and
no longer relies on comparing against strerror_r(-1).
atoi: glibc's atoi is (int)strtol() like Bionic's, so the host symbol is
used there as before. The Bionic shim is registered only on libcs where
that is not true (musl). linker_registry_test expects the matching result.
Brings in 3e6f63e (drop libexecinfo), aa31cdf (Chimera/musl portability),
bc10810 (Bionic atoi, canary signal exit codes) and cb2e9dd (CI fixes).
Conflicts:
- tests/native_update_test.cc: keep both <cerrno> and <csignal>.
- tests/webview_helper_launcher_test.cc: keep the existing python3 socket
read; it already solves the dash multi-digit fd redirection problem that
upstream fixed by switching the helper to bash.
A driver can reject a present mode the device did not enable. Retry once with the mode the game asked for, except after errors another mode cannot fix.
vii