The Open in External Editor button makes editing a game INI file easy,
and the Refresh button is only useful if you edit the game INI. You're
not supposed to edit read-only game INIs, so let's not show these two
buttons for read-only game INIs.
I implemented this by hiding the buttons instead of not creating them in
the first place so we don't have to branch on whether the buttons exist
in GameConfigEdit::ConnectWidgets.
Back in 2018, a Presets system was added to DolphinQt's GameConfigEdit.
Presets was a dropdown menu where you could select a particular setting
to add to your custom game INI. Only a small number of settings were
made available, with the intent that more would be added over time.
8 years later, the set of available settings hasn't been expanded at
all, and I don't know of anyone who uses these presets. On top of this,
we have now made good progress in exposing per-game settings
graphically. I think the Presets system is best off removed.
In place of the Presets menu, we now have "Refresh" and "Open in
External Editor" buttons. These more useful actions were previously
hidden away in the Presets menu.
`value` contains 16 bits of data and `remainder` contains 11 bits of
data. When they're added together, we may end up with 17 bits of data,
so the result should be stored as u32 rather than u16.
This fixes `y` being set to 0 (minimum amplitude) when it should be set
to 32 (maximum amplitude).
In the PWM audio we output, instead of each group of 512 bits consisting
of a run of ones followed by a run of zeroes, now each group of 32 bits
consists of a run of ones followed by a run of zeroes. This gets rid of
noise that was previously present.
Doing this for every group of 8 bits instead makes the Game Boy Player
Start-Up Disc not start correctly for some reason. Game Boy Interface
works fine, though.
I also made us not discard the bottom 7 bits of each PCM sample.
According to Extrems, a real GBA doesn't actually output that many bits,
but doing it in this way makes the code simpler anyway.
Fix incorrect scaling of the gap drawn inside enabled breakpoints in
BreakpointWidget when breakpoints are globally disabled and the font
size is changed from the default.
As the font size increased the gap would become larger and its center
would "migrate" downward and rightward until the gap stopped being
visible at all.
Additionally, at small font sizes integer truncation issues could result
in the gap being offset towards the top left.
Now with cancel button and an actual progress bar. For simplicity, we do
two passes on the progress bar, one for loading the NAND into memory and
one for extracting it. The user directory is likely on an SSD, making
the extraction pass invisibly fast.
Mistakenly, MISALIGNED_HOLE_MASK_PAGE_TABLE_BASE was aligned and
MISALIGNED_HOLE_MASK_PAGE_TABLE_BASE_ALIGNED was misaligned. It should
be the other way around.
These variables are unused due to a separate mistake which is corrected
in the next commit.
Unmapped on the physical level, not the MMU level.
Fixes booting Game Boy Interface. Previously, Game Boy Interface thought
it was running on a Wii because accessing MEM2 didn't raise a PI
interrupt, and as a result tried to exit to the Homebrew Channel in a
way Dolphin's HLE doesn't recognize. (Dolphin's HLE catches jumps to
0x80001800, but GBI is running without address translation at this point
and therefore jumps to 0x00001800 instead.)
Use `sizeHint` instead of `setMinimumSize` to increase the default size
of `StickWidget` and `IRWidget`.
0531286906 doubled the initial sizes of
`StickWidget` and `IRWidget`, but using `setMinimumSize` to do so
prevented users from shrinking the widgets manually.
Resolves bugs.dolphin-emu.org/issues/14019.
Jit64::dcbz's fast path bypasses the dcache, so we shouldn't use it if
accurate dcache is turned on. This fixes the graphical corruption that
would occur in Mario Kart Wii's menu FMVs with accurate dcache.
JitArm64 never had this problem, because it implements dcbz in a
different way. It calls EmitBackpatchRoutine, which already has a check
for accurate dcache.
Rename `AUTO_UPDATE_BETA_INDEX` to `AUTO_UPDATE_RELEASE_INDEX` and
`AUTO_UPDATE_BETA_STRING` to `AUTO_UPDATE_RELEASE_STRING`.
Add a comment explaining that `AUTO_UPDATE_RELEASE_STRING = "beta"` for
backward compatibility reasons.
Some games are showing frame flickering, e.g. Pokémon games when only
the text at the bottom of the screen is updating. GB/GBC games are
apparently especially affected, presumably due to the extra border.
`OpenModeToAndroid("r")` is conceptually wrong, since we're opening a
binary file. It should be either `OpenModeToAndroid("rb")` or just
`"r"`. But either way it evaluates to `"r"`, so this doesn't affect
behavior.
The following settings were excluded:
* Port 1-4 ROM: We're only supporting Game Boy Player for now
* Save in Same Directory as the ROM: Implementation nightmare due to SAF
SAF for save files is a huge can of worms because they're managed in a
more complicated way than asking the user to select an existing file,
so I won't be touching save files for now.
We used to create User/Logs/ as a side effect of creating
User/Logs/Mail/, but the creation of User/Logs/Mail/ was removed in
8cbfee2, so now nothing is creating User/Logs/ anymore. Let's explicitly
create it.
Give MixerFifo a variable sample rate dividend.
Handle byte-swapping and stereo channel construction outside of MixerFifo to better handle the custom layouts of each stream.
- Row height is no longer hardcoded to `24`; instead, the height is
determined by the font height of the currently selected debug font.
- Header height has been reduced (a factor of the font height) as it
only serves as a column resizer.
- A `OnDebugFontChanged()` slot has been connected to properly update
the widget on debug font changes.
| Before | After |
| --- | --- |
| <img alt="Registers widget (before)" title="Registers widget (before)" src="https://github.com/user-attachments/assets/8a6644f9-1081-4ac8-9fff-c79ddb73e103" /> | <img alt="Registers widget (after)" title="Registers widget (after)" src="https://github.com/user-attachments/assets/67f799d0-8afd-4081-bb40-3d7a76ddc705" /> |
These two games have some strange rendering behaviors and therefore can't use the generic bloom actions.
These games have several bloom EFB copies and they draw that on top of an already rendered game. After doing that, they render some other draw calls to "fixup" the bloom that it drew to effectively remove it. This isn't uncommon but there is one special thing these games do...they use a RAM EFB copy for the 'fixup'. This means when playing with high IR, the game will look blurry in specific parts of the screen where the game was attempting to fix the copy!
Bloom removal has addressed this by removing all the draw calls related to the bloom, including the fixup draws. The user then needs to turn on 'EFB Copy To Texture Only' for the best visuals (De Blob 2 in particular is broken without this) as the default settings.
Bloom blurred will need special attention too but Dolphin doesn't currently have enough functionality to handle it.
Add a mod for all games with bloom targets that blurs the bloom based on resolution using a custom material. The shader exposes bloom brightness and the amount of spread through uniforms (not exposed in the UI yet).
The original shader logic was done by TryTwo. This shader was reworked for graphics mods and cleaned up slightly.
Co-authored-by: TryTwo <taolas@gmail.com>
After an EFB operation is turned into a texture, if there is a graphics mod action that provides a custom material, update the EFB texture with the material
This expands the interface of 'CustomResourceManager' to get a Material for post processing a frame buffer (currently EFB). The flow is similar to the normal draw material but distinguishes itself by not needing a UID. The full shader is much simpler than the draw shader and is currently put inline with the shader resource.
* Add a 'AfterEFB' function to graphics mod action that can return a Material
* Rename previous EFB graphics mod function to 'BeforeEFB' to differentiate from 'AfterEFB'
* Rename previous XFB graphics mod function to 'BeforeXFB' to mirror EFB
Moved JVS IO emulation from SI_DeviceAMBaseboard into new JVSIOBoard class.
Sega/Namco board-specific functionality is handled by derived JVSIOBoard classes.
Game input is now sourced from IOPorts rather than being hard coded into JVS IO handlers.
SI_DeviceAMBaseboard: Use IOPorts for status switch input.
Created IOAdapter classes for FZeroAX games.
Created SerialDevice classes for MarioKartGP and FZeroAX FFB steering wheels.
Added game-specific input handling to the various IOAdapter classes.
Some users seem to be under the impression that the panic alert is
saying that enabling MMU will fix the issue, but that's not what it
actually says. Let's try to make this a bit clearer.
Override AGP-bundled R8 in settings.gradle.kts:
- classpath("com.android.tools:r8:9.1.34") from r8-releases/raw
This resolves :app:minifyReleaseWithR8 failing with:
java.lang.IndexOutOfBoundsException: Index -1 out of bounds for length 0
Bug report: https://issuetracker.google.com/issues/495458806
Co-Authored-By: OatmealDome <julian@oatmealdome.me>
This is fixed by setting Texture Cache Accuracy to Safe.
Affected titles:
- R2F Freddi Fish: Kelp Seed Mystery
- RDL Spy Fox in Dry Cereal
- RJQ Pajama Sam: Don't Fear the Dark
I think we've gotten all the useful reports we can get from this now.
Nowadays we're just getting repeated reports of issues we already know
about, like https://bugs.dolphin-emu.org/issues/12321.
Set the default value of `Config::MAIN_WASAPI_DEVICE` to `default`
instead of `Default`. This fixes an issue where `AudioPane`'s `Output
Device` combo would be blank if `WASAPI` was selected and the user had
never changed the value of `Output Device`.
We don't have to worry about backward compatibility with users who have
`Default` in their config because config values aren't written unless
they've been changed at some point from the default, and the combo has
always saved `default` instead of `Default`.
Audio still worked during emulation in this situation because the
fallback for an unrecognized device name is the default device.
To help prevent similar situations in the future references to
`MAIN_WASAPI_DEVICE`'s default value now call `GetDefaultValue` instead
of hardcoding the expected default, or use the new helper function
`Config::IsDefaultValue`.
Significantly rewrote ICCardReader and DeckReader functionality.
Dual IC card slots of VirtuaStriker4 + Gekitou now work.
IC cards are automatically inserted/ejected in VirtuaStriker4 + Gekitou + Avalon.
IC card data is saved to a file.
Avalon deck contents are loaded from a JSON file.
Added IOPorts class to handle bespoke GPIO functionality.
TimeSplitters: Future Perfect is crashing if page table fastmem is
enabled. The reason hasn't been analyzed yet. For the time being, let's
use GameSettings to bring back the old behavior of not having page table
fastmem.
Fixes https://bugs.dolphin-emu.org/issues/14000.
This should stop AchievementManager::LoadGame from being called for the
default ISO when CBoot::BootUp is booting something other than a disc or
IPL (most notably, the Wii Menu), while still detecting all disc changes
that happen while a disc game is running.
Don't copy null terminators from the log's `header.gameid` into
`FifoDataFile`'s `m_game_id`.
Doing so would cause an infinite loop in `Core::GenerateScreenshotName`
as the various concatenations and `fmt::format` calls would then
effectively drop all the timestamps and disambiguating arbitrary numbers
since they followed the null terminator in the gameid, and so the
`File::Exists` calls would always return true.
Fixes https://bugs.dolphin-emu.org/issues/14002.
In some Triforce games (e.g. _F-Zero AX_), the bytes that follow the
region flag in the `boot.id` file (at `0x38`) happen to be `0x00`.
However, in other games (e.g _Mario Kart Arcade GP 2_), it seems the
region flag is padded with `0xFF`.
_Mario Kart Arcade GP 2_ (`boot.id` in the USA version):
```
00000 0000: 42 54 49 44 00 00 01 E0 00 00 00 01 00 00 00 01 BTID.... ........
00000 0010: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ........ ........
00000 0020: 47 43 41 4D 00 00 01 C0 07 D3 05 0F 00 00 00 07 GCAM.... ........
00000 0030: 53 42 4E 4C 00 00 00 00 0E FF FF FF FF FF FF FF SBNL.... ........
-----------
^
|
region flag
```
When the region flag was tested in `switch` statements (where a single
byte was expected in the `case`s), the test would fail, depending
on the game.
This issue would lead to the wrong calculation of the country in
`VolumeDisc::GetCountry()`, which was then used to build the game ID in
`VolumeDisc::GetGameID()`.
The solution is to test using only the least meaningful byte in the
region flag.
Unexpected game IDs were first noticed with USA version of _Mario Kart
Arcade GP 2_, which was wrongly assigned the same game ID that is given
to the Japan version (i.e. `GNLJ82`). The correct game ID for the USA
version is `GNLE82`.
Check the return value of calls to `GetBuffer` and stop the `WASAPI
handler` sound thread if they fail.
This prevents a crash due to a null pointer dereference if `GetBuffer`
is unable to retrieve a buffer, which could be triggered during
emulation by disabling the selected WASAPI output device in the Windows
Sound settings.
The status bar shows the number of games in your collection. If any
games are hidden by the platform, region, or search filters it will also
show how many games are visible and how many are filtered.
The visibility of the status bar can be toggled from the menu by
selecting `View`->`Show Game Count`.
Implements https://bugs.dolphin-emu.org/issues/9517.
Reasons:
- Only 0.000341% of all Android users were on API 21-23 in the last 365 days.
- These devices are old and likely do not run Dolphin well.
- Android 5.x and 6.0 have been without security updates for about 8 years.
- Staying on API 21–23 blocks AndroidX updates, including Lifecycle.
Added SerialDevice base class interface.
Adapted MagneticCardReader to use the SerialDevice interface.
Implemented The Key of Avalon touchscreen SerialDevice.
Altered CSIDevice_AMBaseboard to use SerialDevice.
Made serial reads happen every GCAMCommand rather than only upon write.
Made Stick and IR Widgets bigger
Improved Stick and IR layouts to better utilize space
Made Stick and IR Widgets Scale at a fixed ratio when window is resized
Added Scrollbars to Stick and IR Widgets
Reduced Spinbox padding in dark style
Use the normal state changed `HookableEvent` instead of having
`Core::NotifyStateChanged` call `g_perf_metrics.OnEmulationStateChanged`
directly.
The direct call was added in bad78cfed4 to
avoid a crash. At the time state changed callbacks were stored in a
vector, and the crash was caused by `g_perf_metric`'s destructor trying
to remove the callback from the already-destroyed vector.
Later a97627e736 switched state changed
callbacks to use `HookableEvent`, which is specifically designed to
handle the case where a hook outlives its associated event.
Since the workaround is no longer necessary replace it with a standard
`EventHook`.
This switches from an O(log(N) * M) algorithm to an O(N * log(M))
algorithm. This is advantageous because N, the size of `mappings`, is
usually much smaller than M, the size of `m_page_table_mapped_entries`.
RemoveLargePageTableMapping already did something similar, so we can
even deduplicate some code between it and RemoveHostPageTableMappings.
Speeds up Rogue Squadron 3 by roughly 3% on my PC.
If Dolphin crashes, changes that have been made to settings are often
lost. This has been a minor annoyance for me when developing, but it has
become a much bigger issue recently due to the problem where Dolphin
freezes on shutdown for ROG Ally users.
Instead of saving the config when certain arbitrary settings are
changed, let's save the config when the user closes the settings window.
Fixes a macOS Metal crash when stopping immediately after boot starts.
m_upload_encoder and m_texture_upload_encoder could be dealloc'd during shutdown before endEncoding could be called, which causes a Metal assertion failure.
Co-authored-by: OatmealDome <julian@oatmealdome.me>
Don't set cached array bases to invalid pointers. If a game tries to set
an invalid base just keep the old one, which might cause game problems
but won't crash the emulator.
Users are reporting a crash at the point where WiimoteAndroid::IORead
tries to use m_java_wiimote_payload. This commit solves the problem by
making m_java_wiimote_payload a global reference.
The code for setting up m_java_wiimote_payload has also been moved to
the constructor just because that way it's impossible for it to run
twice. (If the code as written were to run a second time, the old global
reference would be leaked. ConnectInternal should only run once, so this
is just to be on the safe side.)
Fixes https://bugs.dolphin-emu.org/issues/13960.
Use the existing system reference instead of Core::System::GetInstance(),
and calculate the phase 2 scheduling delay from GetTicksPerSecond()
instead of hardcoding 50000 ticks.
Previously, SDL would `find_package(libusb)` which would actually overwrite the user preference in the case where both USE_SYSTEM_LIBUSB and USE_SYSTEM_SDL were OFF. This coincidentally also allows SDL to use libusb on Windows.
Our FindLibUSB.cmake was previously entirely unused unless SDL was being built from Externals, we now rely on it again. It will use PkgConfig if applicable or fall back to looking around on the system, and more importantly it will always create an imported target.
cURL tries to find ZSTD anyways due to the lack of setting it in CACHE, and for both ZLIB and ZSTD if we had done find_package previously, cURL would still use ZLIB/ZSTD regardless of the set variable.
This also fixes the CMake build on Windows, since it would fail to find our target defined in Externals and would fall back to trying to redefine it, which produces an error.
Currently, configuring from System>Bundled doesn't work, it instead produces cryptic errors. And configuring from Bundled>System wont produce errors, but wont use the system libraries either. This change produces a clear error in both cases.
Mistakenly thought the change media call would close the current
game if the new media failed to hash. This wasn't the case so
instead I'll close the current game myself. This fixes an issue
where a default ISO would immediately load achievements when
starting up the Wii menu.
We often use game IDs in paths, so we should try to make sure path
traversal is impossible in game IDs. Admittedly, doing any kind of real
attack using the six bytes available in game IDs is unrealistic, but no
game ID should contain non-alphanumeric or non-ASCII characters anyway.
Might also fix https://bugs.dolphin-emu.org/issues/13982 by skipping
converting between encodings for game IDs.
This makes JitBaseBlockCache::ErasePhysicalRange around 50% faster and
PPCAnalyzer::Analyze around 40% faster. Rogue Squadron 2's notoriously
laggy action of switching to and from cockpit view is made something
like 20-30% faster by this, though this is a very rough measurement.
This is a very small libary, and as I understand it, it was more or less
developed for Dolphin.
This moves the two relevant files from Externals to Common, changes the
namespace to Common, reformats the code, and adds Dolphin copyright
notices. The change in copyright notice and license was approved by
AdmiralCurtiss.
Default values for settings need to be the same in Kotlin and C++,
otherwise settings that haven't been changed by the user will be shown
as having one value in the Android GUI but treated as having a different
value in the core.
Notable changes:
- CMake
- Fixed a bug where SDL couldn't use a vendored libusb or libhidapi (see 29b3fcfb1bc834d0187a8114debdcbbf8381cd61)
- Fixed long startup times on Windows when some non-compliant input devices are present
- Controller support
- Added support for the Razer Raiju V5 Pro
- Improved Switch 2 controller support
- Improved NVIDIA SHIELD controller support
- Fixed various controllers showing up twice on macOS
- Fixed handling GameCube adapters in PC mode on Linux and macOS
APPROVED_LIST_HASH is moved to a separate file, making tests compilation faster after changing it.
The error message prints the hash in a way that it can be directly copy-pasted (though it still needs clang-format).
The legacy Execute1 path (offset=0, length=0) was using Write_U32
(big-endian) to write the "TEST OK" status string. However, the PPC
display code in segaboot reads this buffer with lwz followed by manual
bswap32, so the data must be stored in little-endian. Use Write_U32_Swap
to match the other two TestHardware paths.
Implement the MediaBoard commands and response protocol needed for
the segaboot NETWORK TEST to pass:
- TestHardware (0x0301) two-phase response via CoreTiming: phase 1
echoes test_type with 0x80 acknowledgment flag, phase 2 sends
result with testStatus=2 and checkProgress=100
- GetNetworkConfig (0x0104) with trinetcfg.bin read intercept
- Separate Execute1/Execute2 last-response buffers to prevent
cross-clobber on the shared s_media_buffer
- Generic 0x80xx cleanup command acknowledgment
- Network config persistence for SET IP ADDRESS
Set suggested aspect ratio to 4:3 due to dolphin incorrectly setting it to 16:9 automatically.
Apply suggestion from @jordan-woyak
Co-authored-by: Jordan Woyak <jordan.woyak@gmail.com>
This PR provides formatting updates to Sonic Mega Collection.
All regions:
* Formatting fixes.
* Updated to follow my code naming convention for Sega games.
I've gone through all relevant settings for Rogue Squadron II and III
and overhauled their game INI files. Each setting is explained with a
comment.
Some settings I chose not to include:
* EFB to RAM only seems to affect certain fadeouts in Rogue Squadron II.
Without it, the affected fadeouts are replaced by a pure black screen.
I don't think this is important enough to warrant the performance hit.
* As I was unable to find anything Rogue Squadron III needs EFB to RAM
for, I also didn't find anything it needs DeferEFBCopies disabled for.
* I didn't find anything EFBEmulateFormatChanges was needed for in
either game.
* Enabling EFB access makes the ship engine glow visible in Rogue
Squadron III, but this effect is minor enough that you probably won't
notice it's missing unless you know it's supposed to be there. Since
this is Dolphin's heaviest game, let's give users the choice.
* I was considering forcing XFB to RAM for Rogue Squadron III to make
fadeouts render properly instead of going from magenta to black, since
enabling XFB to RAM doesn't really hurt performance when you're
already enabling EFB to RAM. But then I was unable to find a reason
why we should enable EFB to RAM for this game.
Tested in RS2 and RS3. The RS3 demo disc settings are copied from the
RS3 settings and haven't been tested by me.
Add a minimum value for the automatic size of the performance metrics
graph. The graph can still be manually resized smaller than this limit.
This prevents the graph from automatically resizing itself to be too
small to contain the full graph and legend, which happened when using
native resolution with `Auto-Adjust Window Size` enabled.
Fix a bug causing the performance graph to not resize when the render
window changed size:
* When changing the render window size during emulation the performance
graph wouldn't update its size until the next emulation session.
* When changing the render window size with no emulation active (by
changing the Internal Resolution with Auto-Adjust Window Size enabled)
the performance graph wouldn't update its size until the second
emulation session after the change.
Before explaining why the bug happened, here are some details about Dear
ImGui (henceforth ImGui) for context:
* In order to allow programs to specify initial ImGui window sizes while
also allowing the user to resize them, `SetNextWindowSize` takes a
flag from the `ImGuiCond_` enum specifying under what circumstances
that function should actually have any effect.
* ImGuiCond_FirstUseEver causes ImGui to only apply the command when the
window doesn't have any saved size information for that session or in
the ini file specified by `ImGui::GetIO().IniFilename`. Since we set
that filename to `nullptr`, in practice the resize command is applied
on the first frame of each ImGui/emulation session.
* Qt saves the most recent size of the render window across emulation
(and even Dolphin) sessions, which is then used to set the initial
value of `ImGui::GetIO().DisplaySize` in the next emulation session.
* It takes multiple frames for the size of the render window to update
when changed by setting the internal resolution. This means that
`ImGui::GetIO().DisplaySize` will have a stale value in the
intervening frames, and specifically for the first few frames of
emulation if the resolution was changed beforehand.
When changing the resolution during emulation the call to
`SetNextWindowSize` had no effect because of the
`ImGuiCond_FirstUseEver` flag. `DisplaySize` would be updated several
frames later, and then the next emulation session would update the graph
size on its first frame.
When changing the resolution outside emulation and then starting a game,
the call to SetNextWindowSize on the first frame took effect but used
the stale value of `DisplaySize`. `DisplaySize` would be updated a few
frames later, but the graph wouldn't be resized until the first frame of
the second emulation session.
This commit fixes the issue by using the `ImGuiCond_Always` flag in the
performance graph's call to `SetNextWindowSize` when the render window
size changes.
The patches rearrange some branching to insert a call to VIWaitForRetrace in the main game loop.
This allows ImmediateXFB to work properly so it is no longer forced off by the game ini.
This fixes a regression in ac84ea17a6. That commit was intended to
reduce the number of MapInMemoryRegion calls while otherwise keeping
behavior the same, but it accidentally messed up our logic for writing
to m_logical_page_mappings. This commit restores the old
m_logical_page_mappings behavior, fixing a crash that would occur when
running JitArm64 without fastmem.
2025-11-16 11:57:11 +01:00
366 changed files with 91738 additions and 80867 deletions
@@ -22,6 +23,12 @@ If you know any confidential information related to the GameCube, Wii, or Trifor
Also, this probably goes without saying, but piracy is strictly forbidden both on GitHub and in all other Dolphin channels.
## <a name="genai"></a>Generative AI
We accept contributions from humans, not from AI agents. We expect you to understand and take responsibility for code submitted in your name. If a non-trivial part of your contribution is generated using AI, you need to disclose which parts are generated.
Because large language models are trained on massive amounts of data gathered from the internet, we have to assume that they contain leaked Nintendo information. Therefore, you're not allowed to use LLMs to make changes related to the behavior of the emulated console or to use LLMs to obtain information related to the console.
## <a name="code-licensing"></a>Code licensing
If you make any contributions to Dolphin after December 1st, 2014, you are agreeing that any code you have contributed will be licensed under the GNU GPL version 2 (or any later version).
"description":"Modifies bloom effects to blur them to their native resolution. Results in bloom looking much more natural at higher resolutions but the blur may be too intense in some games."
"description":"Modifies depth of field effects to blur them to their native resolution. Results in depth of field looking much more natural at higher resolutions but the blur may be too intense in some games."
"description":"Modifies bloom effects to blur them to their native resolution. Results in bloom looking much more natural at higher resolutions but the blur may be too intense in some games."
},
"groups":
[
{
"name":"CustomBloom",
"targets":[
{
"type":"efb",
"texture_filename":"efb1_n000134_20x14_6"
},
{
"type":"efb",
"texture_filename":"efb1_n000022_40x28_6"
},
{
"type":"efb",
"texture_filename":"efb1_n000131_80x56_6"
},
{
"type":"efb",
"texture_filename":"efb1_n000130_160x112_6"
}
]
}
],
"features":
[
{
"group":"CustomBloom",
"action":"custom_pipeline",
"action_data":
{
"material_asset":"dolphin_bloom_blur_horizontal"
}
}
],
"assets":[
{
"data":{
"metadata":"../../All Games Blurred Bloom/blur.rastershader",
"pixel_shader":"../../All Games Blurred Bloom/blur.ps.glsl",
"vertex_shader":"../../All Games Blurred Bloom/blur.vs.glsl"
},
"name":"dolphin_bloom_blur"
},
{
"data":{
"metadata":"../../All Games Blurred Bloom/blur_horizontal.rastermaterial"
},
"name":"dolphin_bloom_blur_horizontal"
},
{
"data":{
"metadata":"../../All Games Blurred Bloom/blur_vertical.rastermaterial"
"description":"Skips drawing bloom effects. May be preferable when using a bloom solution from Dolphin's post processing shaders or a third party tool. Requires enabling 'EFB Copy To Texture Only'"
"description":"Modifies bloom effects to blur them to their native resolution. Results in bloom looking much more natural at higher resolutions but the blur may be too intense in some games."
},
"groups":
[
{
"name":"CustomBloom",
"targets":[
{
"type":"efb",
"texture_filename":"efb1_n000134_20x14_6"
},
{
"type":"efb",
"texture_filename":"efb1_n000022_40x28_6"
},
{
"type":"efb",
"texture_filename":"efb1_n000131_80x56_6"
},
{
"type":"efb",
"texture_filename":"efb1_n000130_160x112_6"
}
]
}
],
"features":
[
{
"group":"CustomBloom",
"action":"custom_pipeline",
"action_data":
{
"material_asset":"dolphin_bloom_blur_horizontal"
}
}
],
"assets":[
{
"data":{
"metadata":"../../All Games Blurred Bloom/blur.rastershader",
"pixel_shader":"../../All Games Blurred Bloom/blur.ps.glsl",
"vertex_shader":"../../All Games Blurred Bloom/blur.vs.glsl"
},
"name":"dolphin_bloom_blur"
},
{
"data":{
"metadata":"../../All Games Blurred Bloom/blur_horizontal.rastermaterial"
},
"name":"dolphin_bloom_blur_horizontal"
},
{
"data":{
"metadata":"../../All Games Blurred Bloom/blur_vertical.rastermaterial"
"description":"Skips drawing bloom effects. May be preferable when using a bloom solution from Dolphin's post processing shaders or a third party tool."
File diff suppressed because it is too large.
Load diff
Loaded 100 of 366 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Jordan Woyak